Ir para o conteúdo principal

Alterações no passo #5

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Flip the display assembly over, and apply a [guide|25705|warm iOpener] to the home/Touch ID sensor area for about 90 seconds.
-[* icon_note] This will help soften the adhesive holding the delicate sensor cable in place.
+[* icon_note] Heating the area around the home/Touch ID sensor will help soften the adhesive holding its delicate cable in place, making it easier to remove safely.
+[* black] Flip the display assembly over. Use a hairdryer or [guide|25705|prepare an iOpener|new_window=true] and apply it to the lower edge of the display for about 90 seconds in order to soften up the adhesive underneath.