Ir para o conteúdo principal

Alterações no passo #3

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Pry under the left edge of the home button cable connector to disconnect it from its socket.
- [* icon_caution] If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat of your spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor.
+ [* icon_caution] If the entire connector begins to flip up without separating, [https://d3nevzfk7ii3be.cloudfront.net/igi/YCREWlQsUNsbXdMn.full|press down on the cable at the top edge of the connector with the flat of your spudger|new_window=true], while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor.

Imagem 2

Versão Antiga

Nova Versão

Imagem 3

Nenhuma imagem anterior

Adicionado