Ir para o conteúdo principal

Alterações no passo #1

Edição por silas

Edição recusada por Carsten Frauenheim

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Remove the four Y000 screws securing the bracket over the home/Touch ID sensor:
[* red] One 1.1 mm screw
[* orange] Three 1.3 mm screws
+[* icon_reminder] These screws can be challenging to remove. If a screw is not loosening, apply more pressure and try again. This will prevent damage to the screw head.
[* icon_reminder] During reassembly, be careful not to overtighten these screws, or your home button may not work.