Pular para o conteúdo principal

Alterações neste passo

Edição por John Schutz

Edição recusada por Geoff Wacker

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Use a plastic opening tool to pull the pressure contact from underneath the battery connector.
[* icon_caution] When reinstalling the pressure contact, be sure to clean it with a degreaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to create wireless interference.
[* icon_caution] Take notice of the position of the pressure contact on the upper screw of the battery connector. This clip is hold only by the upper screw. When reinstalling, it must be aligned so the gold contact point will press against the back cover.