Pular para o conteúdo principal

Alterações no passo #1

Edição por Rick Marshall

Edição aprovada por Jake Devincenzi

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Remove the following screws securing the battery connector to the logic board:
[* red] One 1.7 mm Phillips screw
[* orange] One 1.5 mm Phillips screwscrew. Pay attention to the small grounding clip (visible if you magnify the first image).
[* orange] One 1.5 mm Phillips screwscrew. Pay attention to the small grounding clip (visible if you magnify the first image).
[* black] Use a plastic opening tool to gently detach the battery connector from the device.