Pular para o conteúdo principal

Alterações no passo #1

Edição por Walter Galan

Edição aprovada por Walter Galan

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Remove the following screws securing the battery connector to the logic board:
[* red] One 1.7 mm Phillips screw
[* orange] One 1.5 mm Phillips screw. Pay attention to the small grounding clip (visible if you magnify the first image).
[* orange] One 1.5 mm Phillips screw. Pay attention to the small grounding clip (visible if you magnify the first image).
[* black] Use a plastic opening tool to gently detach the battery connector from the device.
[* icon_caution] Pay attention to the pressure contact underneath the top screw of the battery connector. This may come loose while prying the battery connector from its socket.

Imagem 1

Versão Antiga

Nova Versão