Ir para o conteúdo principal

Alterações no passo #36

Edição por Phillip Takahashi

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Allow the case to cool for at least an hour when you have finished sealing it. This will prevent you from starting the AirPort Express while components are too hot.
-[* icon_note] Try to operate your AirPort Express in an open and/or well ventilated location. Initial failure was likely due to over heating, and over heating can still cause your new power supply, or any of the other components, to fail.
+[* icon_note] Try to operate your AirPort Express in an open and/or well ventilated location. Initial failure could have been due to over heating, and over heating can still cause your new power supply, or any of the other components, to fail.