Ir para o conteúdo principal

Alterações no passo #20

Edição por Phillip Takahashi

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Insert the leads of the power supply through the holes indicated in step 10. Insert the wires until the wire sheath is against the PCB.
+[* black] Insert the leads of the power supply through the holes indicated in step 8. Insert the wires until the wire sheath is against the PCB.
[* black] Solder the wires to the PCB and clip off the excess wire.