Ir para o conteúdo principal

Alterações no passo #17

Edição por Phillip Takahashi

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Cut the lead off of the power supply.
+[* black] Cut the lead off of the power supply included in the kit.
[* icon_note] You can cut the power supply leads as short as you desire to reduce clutter.
-[* black] Strip the outer sheath off the wires, being careful not to accidentally sever the wires inside.
+[* black] Strip the outer sheath off the wires. You can use either wire strippers with the correct size hole or you can use a pair of wire cutters to carefully cut just the outer sheath.