Ir para o conteúdo principal

Alterações no passo #16

Edição por Phillip Takahashi

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Insert the leads of the .1 µF capacitor through the holes indicated in step 9. Direction of the capacitor does not matter.
+[* black] Insert the leads of the .1 µF capacitor through the holes indicated in step 9. The capacitor will have markings on it indicating its capacitance. The direction of the capacitor does not matter.
[* icon_note] Be sure to route the leads so that they do not cover any needed holes from step 9 or 10. Also, do not allow the leads to contact the leads of other components.
[* black] Solder the capacitor to the PCB and clip the excess leads off.