Ir para o conteúdo principal

Alterações no passo #13

Edição por Jake Devincenzi

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Insert the leads of the 390 Ω resistor through the holes indicated in step 7. This resistor will have an orange, grey, brown and gold band on it. The direction of the resistor does not matter.
- [* icon_note] Be sure to route the leads so that they do not cover any of the indicated holes in step 7 or 8.
+ [* icon_note] Be sure to route the leads so that they do not cover any of the indicated holes in steps 7 and 8.
[* black] Solder the resistor to the PCB and clip off the excess leads.