Ir para o conteúdo principal

Alterações no passo #13

Edição por Phillip Takahashi

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Insert the leads of the 240 Ω resistor through the holes indicated in step 9. Direction of the resistor does not matter.
+[* black] Insert the leads of the 240 Ω resistor through the holes indicated in step 9. This resistor will have an orange, grey, brown and gold band on it. Direction of the resistor does not matter.
[* icon_note] Be sure to route the leads so that they do not cover any of the indicated holes in step 9 or 10.
[* black] Solder the resistor to the PCB and clip off the excess leads.