Ir para o conteúdo principal

Alterações no passo #12

Edição por Jake Devincenzi

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Solder the pins to the board on the printed side of the PCB.
-[* icon_note] Unsure of how to do proper through-hole soldering? Check out our [guide|6190|technique guide|stepid=26971]. You can even use a thin piece of wire and practice with a hole on an unused trace.
+[* icon_note] Unsure of how to properly through-hole solder? Check out our [guide|6190|technique guide|stepid=26971]. You can even use a thin piece of wire and practice with a hole on an unused trace.
[* icon_caution] Try to solder quickly and efficiently. Prolonged application of heat to any of the component pins can transfer enough heat to damage it.