Ir para o conteúdo principal

Alterações no passo #10

Edição por Phillip Takahashi

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Use a pair of pliers to bend just the tips (approximately 2 mm) of the pins are 90° up, pointing the same direction as the IC face.
+[* black] Use a pair of pliers to bend just the tips (approximately 2 mm) of the pins 90° up so that they are pointing the same direction as the IC face.
[* icon_note] If you bend too much of the pins, they will not be able to reach their assigned holes.