Alterações no passo #6
Edição por Phillip Takahashi —
- Antes
- Depois
- Sem alteração
Linhas de Passo
| [* black] The printed circuit board (PCB) supplied in your kit can be soldered using any rails that you desire. However, we have determined that using the following rails provides a nice, low-profile, fit. |
| [* red] Ground |
| [* orange] 5V |
| [* yellow] 3.3V |
| [* green] "Adjust" |
| [* icon_note] Some PCBs may be mirrored from the picture shown. Marking the through holes with colored markers may help reduce confusion. |