Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #6

Edição por Phillip Takahashi —

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Insert wisdom hereThe printed circuit board (PCB) supplied in your kit can be soldered using any rails that you desire. However, we have determined the following arrangement to be a good fit.
[* red] Ground
[* orange] 5V
[* yellow] 3.3V
[* green] "Adjust"
[* icon_note] Some PCBs may be mirrored from the picture shown. Marking the through holes with colored markers may help reduce confusion.
[* black] Insert wisdom hereThe printed circuit board (PCB) supplied in your kit can be soldered using any rails that you desire. However, we have determined the following arrangement to be a good fit.
[* red] Ground
[* orange] 5V
[* yellow] 3.3V
[* green] "Adjust"
[* icon_note] Some PCBs may be mirrored from the picture shown. Marking the through holes with colored markers may help reduce confusion.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Excluído