Ir para o conteúdo principal

Alterações no passo #2

Edição por Phillip Takahashi

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Use a metal spudger or prying device to lever the case halves apart.
-[* icon_caution] Do not push the prying device too far into the case, as you may damage the EMI shields or other components.
+[* black] Use a metal spudger or prying device to begin levering the case halves apart.
+[* icon_caution] Do not push the prying device too far into the case, as this could damage the EMI shields or other components.
[* icon_note] The case will be most stubborn near the grey power inlet, as this piece is glued to the case halves. Focus on separating the other parts of the case first.