Ir para o conteúdo principal

Alterações no passo #1

Edição por Phillip Takahashi

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

+[* black] Mark or note the edges that need to be cut to open the AirPort Express case.
+[* black] Use a dremel tool with a thin cutting bit to slowly cut around the marked edges. Cut evenly and make several shallow passes to ensure that you don't accidentally cut into any of the components inside.
+ [* icon_caution] If you see sparks while cutting, it means you are cutting through the EMI shields. Reduce your cutting depth immediately to prevent further damage.
+ [* icon_caution] Be especially cautious when cutting next to the LED light, as the power wires are right next to the case wall. Severing these wires may make the repair extremely difficult.

Imagem 1

Nenhuma imagem anterior

Adicionado

Imagem 2

Nenhuma imagem anterior

Adicionado

Imagem 3

Nenhuma imagem anterior

Adicionado