Pular para o conteúdo principal

Alterações no passo #6

Edição por Andrew Bookholt

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_caution] The connectors atblack] Using the endssharp end of a spudger, disconnect the cables are attached very firmly to the sockets on the logic board. Pulling directly on the cable will either separate the cable from its connector or the socket from the logic board.
[* black] Lift the upper case enough to disconnect
for the blue and white power cable from the logic board. Using your fingernails or a dental pick, carefullycables. Again, be careful to pry the connector from its socket. Make sure you're pullingup only on the connectorconnector.
[* black] The upper case is now free
and not oncan be removed from the socketcomputer.
[* icon_caution] The connectors atblack] Using the endssharp end of a spudger, disconnect the cables are attached very firmly to the sockets on the logic board. Pulling directly on the cable will either separate the cable from its connector or the socket from the logic board.
[* black] Lift the upper case enough to disconnect
for the blue and white power cable from the logic board. Using your fingernails or a dental pick, carefullycables. Again, be careful to pry the connector from its socket. Make sure you're pullingup only on the connectorconnector.
[* black] The upper case is now free
and not oncan be removed from the socketcomputer.

Imagem 1

Nenhuma imagem anterior

Adicionado