Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #6

Edição por Andrew Bookholt

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* icon_caution] The connectors atblack] Using the endssharp end of a spudger, disconnect the cables are attached very firmlyconnector for the blue and white power cables. Again, be careful to the socketspry up only on the logic board. Pulling directly on the cable will either separate the cable from its connector or the socket from the logic boardconnector.
[* icon_caution] The connectors atblack] Using the endssharp end of a spudger, disconnect the cables are attached very firmlyconnector for the blue and white power cables. Again, be careful to the socketspry up only on the logic board. Pulling directly on the cable will either separate the cable from its connector or the socket from the logic boardconnector.
[* black] Lift the upper case enough to disconnect the blue and white power cable from the logic board. Using your fingernails or a dental pick, carefully pry the connector from its socket. Make sure you're pulling only on the connector and not on the socket.

Imagem 1

Nenhuma imagem anterior

Adicionado