Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #5

Edição por Andrew Bookholt

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] After disconnectingicon_note] The connectors at the track pad connector, carefully rotateends of the upper case awayfollowing cables are attached very firmly to the sockets on the logic board. Pulling directly on the cable will either separate the cable from its connector or the socket from you and rest it against the displaylogic board.
[* black] After disconnectingicon_note] The connectors at the track pad connector, carefully rotateends of the upper case awayfollowing cables are attached very firmly to the sockets on the logic board. Pulling directly on the cable will either separate the cable from its connector or the socket from you and rest it against the displaylogic board.
[* black] Use the sharp end of a spudger to disconnect the speaker cable connector.

Imagem 1

Versão Antiga

Nova Versão