Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #8

Edição por Jake Devincenzi

Edição aprovada por Jake Devincenzi

Antes
Depois
Sem alteração

Linhas de Passo

[* blackicon_note] Before tightening, make sure that the trackpad is freely moving up and down. If you freefeel stiffness, try to very gently adjust it,it so that in its untightened position the lower part easily moves up and down.
[* black]
While continually trying to click your trackpad, gently tighten the Y1 Tri-wing set screw until the clicks return to their factory "feel".
[* blackicon_note] Before tightening, make sure that the trackpad is freely moving up and down. If you freefeel stiffness, try to very gently adjust it,it so that in its untightened position the lower part easily moves up and down.
[* black]
While continually trying to click your trackpad, gently tighten the Y1 Tri-wing set screw until the clicks return to their factory "feel".
[* icon_note] You can tell when the screw is tightened just right by the noise it makes when the trackpad clicks. If the set screw is too loose, the trackpad will have excessive play before it clicks. If it is too tight, the trackpad will click too easily and won't make the characteristic loud mouse clicking noise.