Alterações no passo #9
Edição por Miroslav Djuric —
- Antes
- Depois
- Sem alteração
Linhas de Passo
| [* black] Hold the logic board down with one hand and use your other hand to lift the left fan up from its housing. There is a piece of black tape securing the left fan to the heat sink. Carefully peel this tape up from the heat sink as you lift the left fan up. [* icon_note] Place the left fan above the Airport card. It is not necessary to remove the fan from the computer entirely. |
| [* black] Hold the logic board down with one hand and use your other hand to lift the left fan up from its housing. There is a piece of black tape securing the left fan to the heat sink. Carefully peel this tape up from the heat sink as you lift the left fan up. [* icon_note] Place the left fan above the Airport card. It is not necessary to remove the fan from the computer entirely. |
| [* black] Lift the right fan up and carefully peel up the tape securing the fan to the heat sink as you go. |
| [* black] Remove the right fan from the computer. |