Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #9

Edição por Walter Galan —

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Hold the logic board down with one hand and use your other hand to lift the left fan up from its housing. There is a piece of black tape securing the fan to the heat sink. Carefully peel this tape up from the heat sink as you lift the fan up.
[* blackicon_note] Place the fan above the Airport card. It is not necessary to remove the fan from the computer entirely.
[* blackicon_note] Place the fan above the Airport card. It is not necessary to remove the fan from the computer entirely.
[* black] Lift the right fan up and carefully peel up the tape securing the fan to the heat sink as you go.
[* black] Remove the right fan from the computer.

Imagem 2

Versão Antiga

Nova Versão