Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #7

Edição por raffaele

Edição recusada por Jake Devincenzi

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Peel up the orange Kapton tape securing the rightmiddle thermal sensor cable to the logic board.
[* black] Remove the following 15 screws:
[* red] One 4.4 mm black Phillips screw to the right of the ram slot.
[* orange] Eight 4.7 mm silver T6 Torx screws securing the logic board to the lower case.
[* yellow] One 6.2 mm black T6 Torx screw on the right side of the left fan.
[* green] Five 9.4 mm silver T6 Torx screws securing the left and right fans.
[* black] Peel up the orange Kapton tape securing the rightmiddle thermal sensor cable to the logic board.
[* black] Remove the following 15 screws:
[* red] One 4.4 mm black Phillips screw to the right of the ram slot.
[* orange] Eight 4.7 mm silver T6 Torx screws securing the logic board to the lower case.
[* yellow] One 6.2 mm black T6 Torx screw on the right side of the left fan.
[* green] Five 9.4 mm silver T6 Torx screws securing the left and right fans.

Imagem 2

Excluído