Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #3

Edição por davidroady

Edição recusada por Jake Devincenzi

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Disconnect the eight indicated connectors by placing a spudger beneath each one on the cable side and lifting up. Be sure to pry up from the side with the wires, just under where they connect! Any other point will break the connector off the board.
[* black] Disconnect the eight indicated connectors by placing a spudger beneath each one on the cable side and lifting up. Be sure to pry up from the side with the wires, just under where they connect! Any other point will break the connector off the board.
[* icon_caution] Use care when disconnecting some of the smaller connectors. A forceful prod with the spudger may accidentally break them off the logic board.