Alterações no passo nº 5
Edição por Sam Omiotek —
Edição aprovada por Sam Omiotek
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Remove the battery. | |
| [* icon_note] If your replacement battery came in a plastic sleeve, remove the sleeve before installation by pulling it away from the ribbon cable. | |
| [* icon_reminder] Before you adhere the replacement battery, temporarily reconnect the battery connector to the logic board socket. This ensures that the battery is properly aligned in its recess. | |
| [* black] Adhere the battery, disconnect it, and continue reassembling your device. | |
| [* icon_reminder] If your new battery doesn’t have adhesive preinstalled, refer to [guide|56465|this guide] to replace the adhesive strips. | |
| - | [* icon_reminder] Perform a [https://support.apple.com/ |
| + | [* icon_reminder] Perform a [https://support.apple.com/guide/iphone/force-restart-iphone-iph8903c3ee6/ios|force restart|new_window=true] after reassembly. This can prevent several issues and simplify troubleshooting. |