Alterações no passo nº 4
Edição por Paige Reisman —
Edição aprovada por Paige Reisman
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* icon_note] If you successfully removed all |
|---|---|
| + | [* icon_note] If you successfully removed all three adhesive strips, move on to the next step. Otherwise, you will need to pry the battery from the rear case. |
| [* black] [guide|25705|Prepare an iOpener|new_window=true] and apply it to the back of the rear case, directly over the battery. Alternatively, you can apply heat using a heat gun or hair dryer. | |
| [* black] After about a minute, flip the phone over and use a plastic card to break up any remaining adhesive behind the battery. | |
| [* icon_caution] Do not insert the card from the right, as prying against the logic board can damage it. Also, be sure to not bend the battery, as doing so can puncture the cell and release dangerous chemicals. |