Alterações no passo nº 2
Edição por Scott Havard —
Edição aprovada por Scott Havard
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* icon_note] ***If this is your first time removing an iPhone battery adhesive strip, refer to the video in the following step before beginning.*** |
|---|---|
| + | [* icon_caution] Try to keep the strips flat and unwrinkled during this procedure; wrinkled strips will stick together and break instead of pulling out cleanly. |
| + | [* black] Slowly pull one battery adhesive tab away from the battery, toward the bottom of the iPhone. |
| + | [* black] Pull steadily, maintaining constant tension on the strip until it slips out from between the battery and the rear case. For best results, pull the strip at a 60º angle or less. |
| + | [* icon_note] The strip will stretch to many times its original length. Continue pulling and re-grab the strip near the battery if necessary. |
Imagem 1
Nenhuma imagem anterior
Adicionado
Imagem 2
Nenhuma imagem anterior
Adicionado
Imagem 3
Nenhuma imagem anterior
Adicionado