Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #14

Edição por Geoff Wacker

Edição aprovada por Geoff Wacker

Antes
Depois
Sem alteração

Linhas de Passo

[* black] And we finally reach the much awaited Apple S2 SiP—complete with the dreaded [guide|40655|resin enclosure.|stepid=93693]
[* black] On the top of the SiP, tucked into the upper left corner, we spot a tiny pair of components:
[* red] Not a (second!) microphone, but a barometric pressure sensor BMP280 from Bosch Sensortec [https://www.bosch-sensortec.com/bst/products/all_products/bmp280|BMP280|new_window=true] Barometric Pressure Sensor
[* red] Not a (second!) microphone, but a barometric pressure sensor BMP280 from Bosch Sensortec [https://www.bosch-sensortec.com/bst/products/all_products/bmp280|BMP280|new_window=true] Barometric Pressure Sensor
[* orange] Likely an iteration of STMicroelectronics C451 gyroscope + accelerometer found in the [guide|40655|original Apple Watch|stepid=93693|new_window=true]
[* icon_note] But wait, isn't that the back? Where all the [guide|40655|cables|stepid=93692|new_window=true] go? Turns out Apple decided to flip the SiP, so all of the connectors are on the same side as the things they connect to. Imagine that!

Imagem 3

Versão Antiga

Nova Versão