Pular para o conteúdo principal

Alterações no passo #1

Edição por torvan

Edição recusada por Evan Noronha

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* red] Using a Torx #10 screw driver,black] Note you may have to remove an adhesive plastic film to get access to the four 6.03mm screws mountingscrews; especially if this is the hard drive tofirst time the assemblyiMac has been opened.
[* red]
.
[* red] Using a Torx #10 screw driver,black] Note you may have to remove an adhesive plastic film to get access to the four 6.03mm screws mountingscrews; especially if this is the hard drive tofirst time the assemblyiMac has been opened.
[* red]
.
[* icon_note] There are two screws mounting the drive on each side.