Alterações no passo nº 3
Edição por Navy Vet 2015 —
Edição aprovada por Navy Vet 2015
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Use a Phillips head screw driver to remove the two larger screws highlighted in red. |
|---|---|
| + | [* black] The two smaller screws (red) were a little tricky. They are screwed down very tight. I started with a #0 phillips head and slightly stripped the screw head. Not enough to destroy it. I recommend using a #1 phillips head on these. I also used a small rubber grip in order to get a better grip on my screwdriver. Made it much easier. |
| + | [* black] The two screws highlighted in orange serve no purpose. There was nothing under there. Unless you have a different variation than mine there is no need to remove these screws. |
Imagem 1
Versão antiga
Nova versão