Skip to main content

Alterações no passo #4

Edição por Miroslav Djuric

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Repeat the same prying procedure on the right side.
[* black] The interior of the minitop cover should now come loose. Lift the top case of the Minibe marginally separated from the bottom casehousing. Use your fingers to completely separate the two, starting with the I/O side of the mini.
[* black] The top casecover does not have any cables attaching it to the bottom housing; it should now be separatedcompletely detached from the bottom casebottom.
[* black] The interior of the minitop cover should now come loose. Lift the top case of the Minibe marginally separated from the bottom casehousing. Use your fingers to completely separate the two, starting with the I/O side of the mini.
[* black] The top casecover does not have any cables attaching it to the bottom housing; it should now be separatedcompletely detached from the bottom casebottom.