Alterações no passo nº 13
Edição por Andrew Optimus Goldheart —
Edição aprovada por Andrew Optimus Goldheart
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] With the component countdown nearly complete, it's time to extract part no. 01: the thermal (cooling) system. | |
| - | [* black] Out comes the system's single |
| + | [* black] Out comes the system's single fan—looking much like a PC case fan, but with some sculpting that's unique to the Xbox One's design. |
| [* icon_note] The standard Xbox One had a similarly robust cooling setup, possibly designed to avoid a repeat of the Xbox 360's [http://www.forbes.com/sites/davidthier/2015/07/09/the-1-billion-hardware-failure-that-nearly-killed-the-xbox/#69304db65030|billion dollar problem|new_window=true]. | |
| [* black] Coming right behind is the impressive aluminum heat sink and copper heat pipe set. | |
| [* icon_note] Notice the design of the heat sink. The width of a heat sink is linearly proportional to the performance of the heatsink in the direction perpendicular to the airflow. Because of this, it is always beneficial to increase the width and not the length of the heatsink. Hopefully this will prevent any overheating issues. |