Alterações no passo nº 9
Edição por Geoff Wacker —
Edição aprovada por Geoff Wacker
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Looks like the only way in is from below, as all the components are secured on the reverse of the metal plate |
|---|---|
| - | [* black] Hard drive (component number 4) is the first out (oddly enough). |
| - | [* icon_note] Probably because these labels are intended for the builders of this device, and less so for us, the mischievous disassemblers that we are. |
| - | [* black] It's a laptop hard drive |
| + | [* black] It looks like the only way in is from below, as all of the components are secured on the reverse of the metal plate. |
| + | [* black] Oddly enough, the hard drive is the first component out, despite being labeled 04. |
| + | [* icon_note] We're betting that these labels are intended for the manufacturers of this device, and less so for us, the mischievous disassemblers that we are. |
| + | [* black] Just like in the original Xbox One, replacing the hard drive unfortunately requires voiding the warranty. But the good news is that the One S packs a standard 2.5 inch SATA III drive. |
| + | [* black] We find a Samsung (Now Seagate) Spinpoint M9T [http://www.seagate.com/www-content/support-content/samsung/internal-products/spinpoint-m-series/en-us/samsung-m9t-internal-ds.pdf|ST2000LM003|new_window=true] 2 TB 5400 RPM with 32 MB Cache SATA III 6.0Gb/s hard drive. |