Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #6

Edição por Evan Noronha

Edição aprovada por Evan Noronha

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Prepare an iOpener and lay it over the lower edge of the digitizer to loosen the adhesive holding the home button gasket in place.
[* icon_note] Wait about two minutes before moving on to ensure the adhesive has adequate time to soften.
[* black] Flip the digitizer panel over and gently push the home button up out of its slot in the front panel.
[* black] Flip the digitizer panel over and gently push the home button up out of its slot in the front panel.
[* icon_caution] Push slowly and apply just enough pressure to slowly separate the gasket from the glass—if you push too hard the gasket will rip.