Ir para o conteúdo principal

Alterações no passo #6

Edição por Phillip Takahashi

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

+[* black] Dip a clean gloved finger into a bottle of new oil and spread the oil onto the gasket of the new oil filter.
+ [* icon_note] Wipe off any excess oil from your hands/fingers when you are done as the oil may make handling the filter or tools difficult.
+[* black] Guide the oil filter back over the engine's oil filter threads and turn the filter clockwise until it is snug.
+ [* icon_caution] If the filter is difficult to turn at the beginning of its threads, stop! You may be cross threading the oil filter. Re-align the oil filter and try again.
+ [* icon_caution] Do not over-tighten your oil filter by using a wrench. Doing so may cause the oil filter seal to leak and will make removing the oil filter very difficult in the future.
+[* black] Remove the oil drain pan from under the car.

Imagem 1

Nenhuma imagem anterior

Adicionado

Imagem 2

Nenhuma imagem anterior

Adicionado

Imagem 3

Nenhuma imagem anterior

Adicionado