Ir para o conteúdo principal

Alterações no passo #1

Edição por Phillip Takahashi

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Begin by placing a jack under the lifting point. It is on the driver's side of the car, below the rocker panel and just behind the front wheel.
[* black] Lift the car with the jack until you can work underneath it.
-[* black] Slide the jack stand under the car, just behind the jack.
+[* black] Slide a jack stand under the car, just behind the jack.
[* black] Slowly lower the jack until the jack stand is supporting the car. Remove the jack.
[* icon_note] Many hydraulic jacks are lowered by placing the open end of the handle over a knob and turning it counter-clockwise. Consult your owners manual for your jack if you don't know how to lower it.
[* icon_caution] ***Never*** work underneath a car that is only supported by a jack. The jack may slip or fail, resulting in serious injury or death.