Ir para o conteúdo principal

Alterações no passo #1

Edição por Phillip Takahashi

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

+[* black] Begin by placing a jack under the lifting point. It is on the driver's side of the car, below the rocker panel and just behind the front wheel.
+[* black] Lift the car with the jack until you can work underneath it.
+[* black] Slide the jack stand under the car, just behind the jack.
+[* black] Slowly lower the jack until the jack stand is supporting the car. Remove the jack.
+ [* black] Many hydraulic jacks are lowered by placing the open end of the handle over a knob and turning it counter-clockwise. Consult your owners manual for your jack if you don't know how to lower it.
+ [* black] ***Never*** work underneath a car that is only supported by a jack. The jack may slip or fail, resulting in serious injury or death.

Imagem 1

Nenhuma imagem anterior

Adicionado

Imagem 2

Nenhuma imagem anterior

Adicionado

Imagem 3

Nenhuma imagem anterior

Adicionado