Skip to main content

Alterações no passo #17

Edição por Phillip Takahashi

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Remove the radiator cap again and insert a funnel into the radiator filler hole.
[* black] Pour approximately 1.7 quarts of coolant into the radiatorradiator or fill until you can see coolant near the filler neck. Use one hand to stabilize the funnel to prevent spills.
[* black] Pour approximately 1.7 quarts of coolant into the radiatorradiator or fill until you can see coolant near the filler neck. Use one hand to stabilize the funnel to prevent spills.
[* icon_note] Towards the end of refilling the cooling system, take short breaks in filling to allow air bubbles to work out of the system. You can turn the engine on for a couple seconds to help pull coolant through the system.