Skip to main content

Alterações no passo #15

Edição por Phillip Takahashi

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] First align the bolt holes of the tank hinge.
[* black] Place the bolts into the tank hinge holes and turn them clockwise by hand a few turns. Do not tighten them yet.
[* black] Align the the front mounting bolt holes and place the bolts into their respective holes.
[* black]
Turn the front mounting bolts clockwise by hand a few turns.
[* icon_note] Don't forget to put the small metal inserts back into the front mounting holes if you removed them earlier.
[* black] Align the the front mounting bolt holes and place the bolts into their respective holes.
[* black]
Turn the front mounting bolts clockwise by hand a few turns.
[* icon_note] Don't forget to put the small metal inserts back into the front mounting holes if you removed them earlier.
[* black] Tighten all bolts with a 10 mm socket wrench or box end wrench until snug.