Skip to main content

Alterações no passo #15

Edição por Phillip Takahashi

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] First alignAlign the bolt holes of the tank hinge base.
[* blackred] Place the hinge base bolts into their holes and turn them clockwise by hand a few turns. Do not tighten them yet.
[* blackorange] Align the the front mounting bolt holes and place the front mounting bolts into their respective holes. Turn the bolts clockwise by hand a few turns.
[* black] First alignAlign the bolt holes of the tank hinge base.
[* blackred] Place the hinge base bolts into their holes and turn them clockwise by hand a few turns. Do not tighten them yet.
[* blackorange] Align the the front mounting bolt holes and place the front mounting bolts into their respective holes. Turn the bolts clockwise by hand a few turns.
[* icon_reminder] Don't forget to put the small metal inserts back into the front mounting holes if you removed them earlier.
[* black] Tighten the 4four tank mounting bolts with a 10mm socket wrench or box end wrench until snug.
[* black] Tighten the 4four tank mounting bolts with a 10mm socket wrench or box end wrench until snug.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Versão Antiga

Nova Versão