Skip to main content

Alterações no passo #10

Edição por Phillip Takahashi

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Insert the bottom right radiator mounting bolt and turn it clockwise by hand a few turns.
[* black] Tighten the three radiator mounting bolts by turning them clockwise with a 10mm socket wrench or box end wrench until they are snug.
[* blackred] Re-wrap the wires in the wire holder to prevent them forfrom shifting while riding.
[* black] Tighten the three radiator mounting bolts by turning them clockwise with a 10mm socket wrench or box end wrench until they are snug.
[* blackred] Re-wrap the wires in the wire holder to prevent them forfrom shifting while riding.