Skip to main content

Alterações no passo #9

Edição por Phillip Takahashi

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Slide the right radiator hose back onto the radiator inletoutlet.
[* black] Move the hose clamp back over the hose/radiator inletoutlet and turn the clamp bolt clockwiseclockwise, with a 6 mm socket, 6 mm box end wrench or Phillips #1 screwdriver, until the hose clamp is snug.
[* black] Slide the right radiator hose back onto the radiator inletoutlet.
[* black] Move the hose clamp back over the hose/radiator inletoutlet and turn the clamp bolt clockwiseclockwise, with a 6 mm socket, 6 mm box end wrench or Phillips #1 screwdriver, until the hose clamp is snug.