Skip to main content

Alterações no passo #7

Edição por Phillip Takahashi

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Move the radiator back to it's original position.
[* black] Wipe dirt and debris off the radiator inlets with a clean rag.
[* black] Insert the 10 mm hex radiator mounting bolts into the two top mounting points. Screw these bolts in a few turns by hand, leavingbut leave them loose enough to allow the radiator to rotate and back and forth.
[* black] Insert the 10 mm hex radiator mounting bolts into the two top mounting points. Screw these bolts in a few turns by hand, leavingbut leave them loose enough to allow the radiator to rotate and back and forth.