Skip to main content

Alterações no passo #12

Edição por Phillip Takahashi

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Check and adjust the new spark plug's gap as described in step 615.
[* black] Check and adjust the new spark plug's gap as described in step 615.
[* black] Put the new spark plug in the spark plug driver and insert it into the spark plug hole.
[* black] Turn the spark plug clockwise until the spark plug gasket seats. Turn the spark plug 1/4 to 1/2 a turn clockwise from the seated position.
[* icon_note] See step 615 for torque specs if you are using a torque wrench.
[* icon_note] See step 615 for torque specs if you are using a torque wrench.
[* black] Firmly press the spark plug cap onto the new spark plug until you feel it fully seat.