Skip to main content

Alterações no passo #5

Edição por Phillip Takahashi

Aguardando aprovação

Sem alteração

Linhas de Passo

[title] Changing Spark Plug #1
[* black] Remove the spark plug cap from cylinder 1.
[* icon_caution] Do not remove the cap by pulling on the wires, you risk ripping the wire out of the cap.
[* black] Use a 5/8" spark plug driver, a socket extension and a socket wrench to remove the spark plug. Press the spark plug driver firmly onto the spark plug until you feel it "grab" the plug and turn it counter-clockwise until you can pull it out of the cylinder head.
[* icon_caution] Be careful not to drop anything down the spark plug hole and into the cylinder! If something falls into the cylinder you will have to do a complete cylinder tear down to remove what ever was dropped!