Skip to main content

Alterações no passo #4

Edição por Phillip Takahashi

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Unbend the wire holder on the inside of the front right of the frame to get slack in the wires attached to the radiator.
[* black] Carefully move the radiator to the right side of the bike, out of the way of the cylinder head.
[* icon_caution] The radiator is not completely disconnected from the bike, there are still wires connected to the thermostatthermo-switch and fan. Be sure that you do not put too much tension on these wires or you risk ripping them out of their sockets.
[* icon_caution] The radiator is not completely disconnected from the bike, there are still wires connected to the thermostatthermo-switch and fan. Be sure that you do not put too much tension on these wires or you risk ripping them out of their sockets.