Skip to main content

Alterações no passo #4

Edição por Phillip Takahashi

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Insert wisdom hereUnbend the wire holder on the inside of the front right of the frame to get slack in the wires attached to the radiator.
[* black] Carefully move the radiator to the right side of the bike, out of the way of the cylinder head.
[* icon_caution] The radiator is not completely disconnected from the bike, there are still wires connected to the thermostat and fan. Be sure that you do not put too much tension on these wires or you risk ripping them out of their sockets
.
[* black] Insert wisdom hereUnbend the wire holder on the inside of the front right of the frame to get slack in the wires attached to the radiator.
[* black] Carefully move the radiator to the right side of the bike, out of the way of the cylinder head.
[* icon_caution] The radiator is not completely disconnected from the bike, there are still wires connected to the thermostat and fan. Be sure that you do not put too much tension on these wires or you risk ripping them out of their sockets
.

Imagem 1

Versão Antiga

Nova Versão