Skip to main content

Alterações no passo #2

Edição por Phillip Takahashi

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Loosen the hose clamp attached to the right side radiator inletoulet by turning the bolt counter-clockwise with a Phillips #1 screwdriver, a 6 mm socket wrench or a 6 mm box end wrench.
[* black] Slide the hose clamp down the radiator hose, away from the radiator inletoutlet.
[* black] Carefully pull the radiator hose off the radiator inletoutlet. Slightly twisting the hose left and right to "walk" the hose off the inlet may help if it is stuck.
[* black] Loosen the hose clamp attached to the right side radiator inletoulet by turning the bolt counter-clockwise with a Phillips #1 screwdriver, a 6 mm socket wrench or a 6 mm box end wrench.
[* black] Slide the hose clamp down the radiator hose, away from the radiator inletoutlet.
[* black] Carefully pull the radiator hose off the radiator inletoutlet. Slightly twisting the hose left and right to "walk" the hose off the inlet may help if it is stuck.